![homeseer forum insteon homeseer forum insteon](http://www.homeseer.com/images/enable-disable.png)
Enter the Insteon ID and location and name to register a device.Ĩ. Use the plugin Manage Devices page to start adding devices, etc. Restart the plugin again and watch for a successful connection from the plugin to the Interface.ħ. Note: for Linux (or Linux based devices like the HomeTroller Zee series) and OSX installations use something like the following for the Port name:Ħ.
#HOMESEER FORUM INSTEON PASSWORD#
This is not the Smarthome Connect username & password You will also need to enter a username & password when using the hub. Goto the plugin config page (use the Insteon link on the previous page) and set the port: COM1, COM2, etc, or for the Hub enter the local IP address:Port# (eg 192.168.1.80:25105). Enable X10 on the plugin config page if necessary.ĥ. HS3: Restart HS, go to the Manage/Plugin page and enable the plugin. If you use X10, enable that interface as well.
![homeseer forum insteon homeseer forum insteon](https://i.gyazo.com/c42d8a3a5c29bf1c1d588de9656de9b1.png)
HS2: Restart HS and goto the HS setup/interface page, and Enable the IO Interface. This is probably not necessary for Homeseer appliances, or other Linux installations.ĭrivers are not required for the 2412s or 2413s or the Insteon Hub.Ĥ.
#HOMESEER FORUM INSTEON DRIVER#
this driver will provide the virtual com port that the plugin needs.
#HOMESEER FORUM INSTEON INSTALL#
For Windows, If you have a 2412u, 2413u or 2448A7T, then download and install the latest ftdi chipset drivers. The HS3 plugin should be installed from the Updater.ģ. For HS2 copy the insteon.lf file to the config folder and continue with step 3 below. Note: if you downloaded the plugin from the forum, shutdown HS, copy the hspi_insteon.dll (and other dlls) to your homeseer. Go to the HS Updater and install the following plugin: Insteon PLM Plug-In By Mark Sandler Here are the basics for getting started using a Smarthome PLM based interface and Homeseer:ġ. I also plan on adding various Insteon lamp modules, sprinkler control, alarm, and HVAC. It is a plain API without any application layer functionality. Z-Wave controller port Valid values are e. I thought that ISY or Homeseer would be a better choice, since they support Z-wave. Z-Ware can be used as a Web interface to Z/IP gateway, or simply as a C API. I had thought about the Insteon Hub, but I will be installing a Baldwin z-wave deadbolt. I believe the latest hubs come with an admin pswd that is printed on the bottom, so you may need to login with these creds. I have mostly Insteon in my home and want to be able to control it from my phone. i would suggest a static ip address for the hub. You must to get the hub online and accessible locally via a browser for example. a pair of Access Points (2443) work as well. either a Singalinc (2406H) or a pair of dual-band devices (one installed on each leg/phase) of your electrical system. the new insteon hub (which is a network device) is a supported controller in v1.8 or later The USB dongle (2448A7-no longer available) was a good choice if your HS server is centrally located in your house and you don't need X10 capabilities. I recommend the 2413S as it is more reliable. an Insteon controller such as the PLM 2413U (usb), 2413S (serial), or the newer Insteon Hub.
![homeseer forum insteon homeseer forum insteon](https://cdn.shopify.com/s/files/1/1248/3803/products/1500086263_spo_spo.jpg)
Recommendations for Getting Started with Insteon and Homeseer